24V 30W Dimmable Power Supply Driver
This dimmable power supply is used with our professional 24v LED strips and will power up to 30w of LED's.
To work out what power supply is needed, multiply the LED strip "watts per metre" by the amount of metres being used.
You can use a much larger power supply for your strip as long as you are using 24v strip this will not matter.
For example if you have a 24W total strip this will work not a problem.
Please Note: This is just a power supply and NOT a controller.
This driver is designed to be used with a standard switch or smart switch to turn a strip on and off, if you want to control the strip via a smart phone app then you will need to find a controller to be used with this power supply.
Short circuit and over load protection.
Spec:
- Length: 107mm
- Height: 41mm
- Width: 22mm
- Output Power: 30W
- Input Voltage: 170-250VAC (50/60Hz)
- Output Voltage: 24V
- Output Current 1.25A