ES | E27 | Edison Screw Threaded White Lampholder with 10mm Thread

ES | E27 | Edison Screw Threaded White Lampholder with 10mm Thread

This ES | E27 | Edison Screw Threaded White Lampholder with 10mm Thread is a high quality plastic lampholder with a 10mm thread on the bottom allowing it to be screwed onto an existing 10mm diameter thread. This makes it the perfect part if you are looking to add a lampholder or replace a broken one on your light fitting.

This lampholder will accept a shade.

Comes with 2 additional shade rings to hold a shade in position.

There are 2 options for this lampholder:

• 10mm Plastic Thread: This is all plastic this will be used if you only have a 2core cable and there is no provision for an earth cable. This does not have a locking screw so a dab of super glue may be required.
• 10mm Metal Thread: This has a metal thread in the base with a locking screw to lock the lampholder onto your 10mm thread, also has an earth connection and should only be used if you have a 3core cable with earth.

Please Note: If you select the plastic thread and have a metal thread on your light fitting, you may want to add an isolator, this will protect the cable from potentially hitting the metal thread and causing a fault. Please search for 21502 This is for the plastic thread only, you cannot use an isolator with the metal thread and there is no need due to an earth being available.

Spec:

• Lamp Type: ES | E27 | Edison Screw
• Height: 55mm
• Diameter: 40mm
• Diameter including Shade Ring: 57mm
• Thread Size: 10mm
• Max Wattage: 60w
• Material: Plastic